Other

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

Genuine replacement parts Get back on the road with a quality replacement hanger. Original equipment replacement rear derailleur hanger. - Original replacement rear derailleur hanger - For use with 2008-2010 Trek Madone

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

Flat mount rear adapter for a 160mm rotor

Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact

The Command Post SRL Clamp moves the Command Post's lever into the position where the front shifter would normally go, giving you more control. - Hinge clamp for easy installation. - Lightweight alloy clamp with steel bolt. - Lightweight alloy clamp with steel bolt.

Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.

Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle

Developed to work on either the Specialized Carbon or Hydroformed Alloy Aerobar, the Shiv Low-Stack Clamp reduces up to 19mm of stack height, in order to obtain a lower position while in the Aerobars. - Compatible w/ Specialized Carbon or Hydroformed Alloy Aerobar (2102-2010 / 2102-2005) - Reduces 19mm (1.9cm) of stack height

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

Custom Cane Creek lower race for Salsa.

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

M15/M26 Alloy GXP Crank Arm Bolt Kit

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts