Parts

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Genuine replacement parts Get back on the road with a quality replacement hanger. Original equipment replacement rear derailleur hanger. - Original replacement rear derailleur hanger - For use with 2008-2010 Trek Madone

High-quality replacement skewer to keep the bike moving. - Skewer for Boost 141 rear wheels - Neutral black lever and steel axle

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

Make sure your kid has a good grip out on the trail with Trek's Kids' MTB Grips. Their knurled design is easy to hold onto when things get bumpy. Choose the 75/125mm pair for twist-shifter compatibility.

Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes with twist shifters - Set of two grips Specifications - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

- Size: 16 x 1-3/8 - ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 84g

- Low Lead Valve - ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35mm - Labeled Size: 16 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight (g): 86g

- Size: 18 x 1-3/8 - ISO Diameter: 400/18" - ISO Width (mm): 35mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 98g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Low Lead Valve - ISO Diameter: 457 - ISO Width (mm): 44mm - Labeled Size: 22 x 1.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 145g

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

- High Performance Brake Pads - Disc Pad Material: Organic

Flat mount rear adapter for a 160mm rotor

Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.